Prepáčte, táto položka je dočasne vypredaná.
3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
Podobné produkty, ktoré by sa vám mohli páčiť
Chceš, aby sme ti dali vedieť, keď bude späť?
Zhrnutie
- Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
- Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
- Support motor: Supports XYZ three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to 100%, and also supports 3-pin PWM/TTL signal control module
- New features: Added 2-pin emergency stop button port, probe port, XYZ limit port, and added power button switch; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
- Important note: This is a control board, not plug and play. Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager>"Ports", verify if "USB-SERIAL CH340 (COMx)" appears.
3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router Popis
Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
Support motor: Supports three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to , and also supports 3-pin PWM/TTL signal control module
New features: Added 2-pin emergency stop button port, probe port, limit port, and added power button ; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
Important note: This is a control board, not plug and . Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager&"", verify if "USB-SERIAL CH340 (COMx)" appears.
Color: As Shown
Material: plastic
Package Contents:
1 * Engraving machine control board
Podrobnosti
| OPC | PYMKMMQ |
|---|---|
| Kódy | 6033996928649 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 4cm |
|---|---|
| Width | 15cm |
| Length | 18cm |
| Weight | 0.2kg |
| Colour | As Shown |
| Material | plastic |