Audio Module Single 12V to 24V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 129,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (10,57 €) | pon 27 júl - sob 1 aug
Predáva: CollBea
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Zosilňovače do auta
Zhrnutie
- 1. With isolation function, the power board test conditions input DC12V, the ±12V output is about 13-14V without load,
- 2. The ±18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
- 3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
- 4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
- 5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.
Audio Module Single 12V to 24V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module Popis
1. With isolation function, the power board test conditions input DC12V, the 12V output is about 13-14V without load,
2. The 18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.
Description:
1.Output power: 200W
2. Input voltage: DC10-15V
3. Output current: 200W/output voltage = output current. That is, the higher the output voltage, the smaller the current.
Specifications: 24V output
Colour:As Shown
Material:PCB
Size:75x70x36mm
Package Contents:
1x Power Amplifier Module
1x 10A Fuse
Podrobnosti
| OPC | PRPB56G |
|---|---|
| Kódy | 4713404563885 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 4cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.1885kg |
| Colour | As Shown |
| Size | 24V |
| Material | PCB |
Porovnajte predajcov pre Audio Module Single 12V to 24V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module
- Nové od 26,89 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(201 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
16,32 €
|
+10,57 € Delivery
Odhadované doručenie:
27 júl - 1 aug
|
26,89 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy