Trhová platforma s Cashback Okamžité odmeny za všetko Doprava zadarmo na milióny produktov Vysoko hodnotené Výborné hodnotenia na Trustpilote Staňte sa Cashback VIP Vyššie zľavy, lepšie ponuky 30-dňové vrátenie tovaru Plus ochrana nákupu

Prepáčte, táto položka je dočasne vypredaná.

Filament Cutter Lever Replacement Kit for P2S 3D Printer Cutting Handle Trigger Arm with Spring Screw Parts

Nové

Podobné produkty, ktoré by sa vám mohli páčiť

Príslušenstvo pre rotačné nástroje

Chceš, aby sme ti dali vedieť, keď bude späť?

Pridať do košíka

Popis a podrobnosti

Zhrnutie

The handle specially designed for Bambu Lab P2S 3d printing project, can directly replace broken original. Not for A1/A1 Mini/A2L/P1P/P1S/X1 carbo/X2D/H2D/H2C/H2S
Package Include: 1*Filament Cutter Lever kit
The filament cutter lever on the tool-head cuts filament just above the hotend to retract old and load new filament. The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching
The handle of this cutter is made of strong and durable materials, it has a longer service life. When to Use: The cutter lever itself is physically damaged
Easy to install, you firstly open P2S tool-head front cover, release the cutter lever, remove cutter from the lever with tweezers, finally use a tool to carefully push circular locking clip off of the filament lever pin, remove cutter lever, replace new.

Filament Cutter Lever Replacement Kit for P2S 3D Printer Cutting Handle Trigger Arm with Spring Screw Parts Popis

The handle specially designed for P2S 3d printing project, can directly replace broken original. Not for A1/A1 /A2L/P1P/P1S/X1 carbo/X2D/H2D/H2C/H2S
Package Include: 1*Filament Cutter Lever kit
The filament cutter lever the tool- cuts filament just above the hotend to retract old and load new filament. The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching
The handle of this cutter is made of strong and durable materials, it has a longer service life. When to Use: The cutter lever itself is physically damaged
Easy to install, you firstly open P2S tool- front cover, release the cutter lever, remove cutter from the lever with tweezers, finally use a tool to carefully push circular locking clip off of the filament lever pin, remove cutter lever, replace new.

Please note: The actual product may vary slightly in color, but this does not affect its use. Thank you!
Color: As Shown
Material: Plastic+Metal

Package Contents:
1*Filament Cutter Lever Replacement Kit

Podrobnosti