Obrázky produktu
OBD2 Diagnostic Interface Wiring Cable Applicable Adapter Harness for Scan My and TesLAX Model 3
Značka Melitt
Nové
Ponáhľajte sa – na sklade už len 1 kus
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 130,000 hodnotení s “Vynikajúcim” hodnotením
8,82 €
14,14 €
38 % zľava!
+3,00 € doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (3,00 €) | str 19 - uto 25 aug
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Popis a podrobnosti
Zhrnutie
- Supported device: This adapter harness is designed to work with any good quality OBD2 scanner / code reader, which can properly manage CANBUS data. You can select from a wide range of scan tools. such as handheld OBD2 scanner, PC based OBD2 scanner, Mini OBD2 interface via bluetooth & wifi connection
- Note: Adapter is wired according to OBD2 standard,your device must be supported by Tesla apps.
- Vehicle compatibility: For Tesla Model 3 / Y from 2019 and onwards. For Tesla Model 3 & Y are equipped with wiring loom inside back end of center sonsole. you need remove protective hardcover to access it, plug our harness between connnectores to create J1939 socket for OBD2 device.
- OBD Diagnostic Adapter
- For Tesla Model 3
OBD2 Diagnostic Interface Wiring Cable Applicable Adapter Harness for Scan My and TesLAX Model 3 Popis
Supported device: This adapter harness is designed to work with any good quality OBD2 scanner / code reader, which can properly manage CANBUS data. You can select from a wide range of scan tools. such as handheld OBD2 scanner, PC based OBD2 scanner, OBD2 interface via & wifi connection
Note: Adapter is wired according to OBD2 standard,your device must be supported by apps.
Vehicle compatibility: For Model 3 / Y from 2019 and onwards. For Model 3 & Y are equipped with wiring loom inside back end of center sonsole. you need remove protective hardcover to access it, plug our harness between connnectores to create J1939 socket for OBD2 device.
Intall Guide: 3 Step: Remove the cover - Disconnect the cable connector-Connect the adapter cable
Item Type: Cables, Adapters & Sockets
colour:As shown
Material:plastic
Package Contents:
1 x Diagnostic Cable
Podrobnosti
| OPC | PXJ6DRJ |
|---|---|
| Značka | Melitt |
| Kódy | 6032148259556 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 15cm |
| Length | 8cm |
| Weight | 0.087kg |
| Colour | As shown |
| Material | plastic |
Porovnajte predajcov pre OBD2 Diagnostic Interface Wiring Cable Applicable Adapter Harness for Scan My and TesLAX Model 3
- Nové od 11,82 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(83 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
8,82 €
|
+3,00 € Delivery
Odhadované doručenie:
19-25 aug
|
11,82 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy