Obrázky produktu
Sorry, this item is temporarily out of stock.
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
New
Would you like us to let you know when it's back?
Popis a podrobnosti
Shrnutí
- For HW Battery Unlock Tool
- Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
- Method 2: While the device battery is charged, power on the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
- Output supports both USB-A and Type-C ports. The microcontroller is powered by a 3V button battery.
- For HW USB Test Board
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB Popis
For HW Battery Unlock Tool
Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
Method 2: While the device battery is charged, power the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
Output supports both USB-A and Type-C . The microcontroller is powered by a 3V button battery.
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Test Board
Podrobnosti
| OPC | PXW9PN5 |
|---|---|
| Kódy | 6031220936026 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Plastic+Metal |