Produktbilleder
CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna
Ny
På lager
Derfor vil du elske at handle hos OnBuy:
- Tjen Cashback på hvert køb – brug det med det samme på din næste ordre
- Gratis levering – på millioner af varer på siden
- Kunder elsker os – 136,000 anmeldelser med vurderingen “Fremragende”
580,32 kr.
1.454,59 kr.
Spar 60%!
+40,00 kr. levering
1%
Tjen 5,80 kr. med det samme
Læs mere
Priserne for varer, der sælges af OnBuy, inkluderer moms.
Rentefrie betalingsmuligheder
Se fuld produktbeskrivelse og detaljer
Levering: Standard (40,00 kr.) | fre. 23. - tor. 29. okt.
Solgt af: CollBea
Returnering: 30 dage
180 dages betalingsbeskyttelse
Du kan også lide
Beskrivelse og detaljer
Oversigt
- Onboard USB Bluetooth (BE200 module has built-in Bluetooth function)
- Short the Boot and OTG jumpers, then power on the device. Connect the USB-C port in the upper right corner to enter the programming mode (remove the two shorting caps after programming is complete)
- Shorting the OTG jumper alone allows the USB-C port in the upper right corner to be connected to a PC for Device applications after the system boots up (used to simulate the board as a USB flash drive, network card, HID keyboard and mouse; firmware support required)
- If the OTG jumper is left floating, the USB signal will connect to Bluetooth and the three USB-A host ports
- CM4 WiFi7 Board
CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna Beskrivelse
Onboard USB (BE200 module has built-in function)
Short the Boot and OTG jumpers, then power the device. Connect the USB-C port in the upper right corner to enter the programming mode (remove the two shorting caps after programming is complete)
Shorting the OTG jumper alone allows the USB-C port in the upper right corner to be connected to a PC for Device applications after the system boots (used to simulate the board as a USB flash drive, network card, HID keyboard and mouse; firmware support required)
If the OTG jumper is left floating, the USB signal will connect to and the three USB-A host
Note that a USB-C device and a USB-A host cannot be used simultaneously!
Supports the entire series of RPi CM4 core boards
(The product printed words may vary depending the batch, but this does not affect use)
Color: As Shown
Material: Pcb+Aluminum Alloy
Package Contents:
1*Expansion Board kits(Screw color and style are random)
Detaljer
| OPC | PVK8YBF |
|---|---|
| Koder | 6033601610686 (EAN) |
| Produkt- og sikkerhedsoplysninger |
Produktdata
| Height | 4cm |
|---|---|
| Width | 10cm |
| Length | 18cm |
| Weight | 0.3565kg |
| Colour | As Shown |
| Material | Pcb+Aluminum Alloy |
Sammenlign sælgere for CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna
- Ny fra 620,32 kr.
| Sælger | Bedømmelser | Garanti | Returneringer | Pris | Levering | I alt | Antal |
|---|---|---|---|---|---|---|---|
|
Afsendt fra:
|
(307 anmeldelser) | - |
30 dage
Gratis retur Nej
|
580,32 kr.
|
+40,00 kr. Delivery
Forventet levering:
23-29 okt.
|
620,32 kr.
|
Tjen penge, mens du handler med øjeblikkelig Cashback på alt.
Ingen hage, ingen omkostninger
- Indbetalt til din OnBuy-konto
- Brug dem på dit næste køb
- Gem det eller hæv det
Bliv Cashback VIP
Bare 1 køb giver adgang til bedre tilbud og priser