Produktbilder
CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna
Ny
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 136,000 anmeldelser med vurderingen “Utmerket”
868,81 kr
1 922,33 kr
55 % rabatt!
+3,71 kr levering
1%
Tjen 8,69 kr med én gang
Les mer
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (3,71 kr) | ons 28. okt - tir 3. nov
Solgt av: CollBea
Returer: 30 dager
180 dagers betalingsbeskyttelse
Du vil kanskje også like
Beskrivelse og detaljer
Sammendrag
- Onboard USB Bluetooth (BE200 module has built-in Bluetooth function)
- Short the Boot and OTG jumpers, then power on the device. Connect the USB-C port in the upper right corner to enter the programming mode (remove the two shorting caps after programming is complete)
- Shorting the OTG jumper alone allows the USB-C port in the upper right corner to be connected to a PC for Device applications after the system boots up (used to simulate the board as a USB flash drive, network card, HID keyboard and mouse; firmware support required)
- If the OTG jumper is left floating, the USB signal will connect to Bluetooth and the three USB-A host ports
- CM4 WiFi7 Board
CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna Beskrivelse
Onboard USB (BE200 module has built-in function)
Short the Boot and OTG jumpers, then power the device. Connect the USB-C port in the upper right corner to enter the programming mode (remove the two shorting caps after programming is complete)
Shorting the OTG jumper alone allows the USB-C port in the upper right corner to be connected to a PC for Device applications after the system boots (used to simulate the board as a USB flash drive, network card, HID keyboard and mouse; firmware support required)
If the OTG jumper is left floating, the USB signal will connect to and the three USB-A host
Note that a USB-C device and a USB-A host cannot be used simultaneously!
Supports the entire series of RPi CM4 core boards
(The product printed words may vary depending the batch, but this does not affect use)
Color: As Shown
Material: Pcb+Aluminum Alloy
Package Contents:
1*Expansion Board kits(Screw color and style are random)
Detaljer
| OPC | PVK8YBF |
|---|---|
| Koder | 6033601610686 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 4cm |
|---|---|
| Width | 10cm |
| Length | 18cm |
| Weight | 0.3565kg |
| Colour | As Shown |
| Material | Pcb+Aluminum Alloy |
Sammenlign selgere for CM4 WiFi7 Expansion Board for Raspberry Pi Computers Module Support WiFi 6/WiFi 5 with Aluminum Alloy Casing +Antenna
- Ny fra 872,52 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(311 anmeldelser) | - |
30 dager
Gratis retur Nei
|
868,81 kr
|
+3,71 kr Delivery
Estimert levering:
28 okt - 3 nov
|
872,52 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser