Markedspladsen med Cashback Optjen på alt med det samme Gratis levering på millioner af produkter Højt vurderet Fremragende Trustpilot-anmeldelser Bliv Cashback VIP Højere rater, bedre tilbud 30 dages returret Plus købsbeskyttelse

Sorry, this item is temporarily out of stock.

New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure

New

Lignende produkter, vi tror du vil kunne lide

Enheder til uafbrudt strømforsyning

Would you like us to let you know when it's back?

Læg i kurv

Beskrivelse og detaljer

Oversigt

Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on.
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption:

New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure Beskrivelse

Air Conditioner Start- Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start- command every 30 minutes to ensure the air conditioner is always .
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns , the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back . The controller will automatically send a start- command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: -5V; Standby Power Consumption:

Detaljer