Cashback-markedsplassen Få Cashback på alt med én gang Gratis frakt på millioner av produkter Høyt vurdert Strålende anmeldelser på Trustpilot Bli Cashback-VIP Høyere satser, større rabatter 30 dagers returrett Pluss kjøpsbeskyttelse

Sorry, this item is temporarily out of stock.

New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure

New

Lignende produkter vi tror du vil like

Avbruddsfrie strømforsyningsenheter

Would you like us to let you know when it's back?

Legg i handlekurv

Beskrivelse og detaljer

Sammendrag

Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on.
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption:

New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure Beskrivelse

Air Conditioner Start- Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start- command every 30 minutes to ensure the air conditioner is always .
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns , the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back . The controller will automatically send a start- command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: -5V; Standby Power Consumption:

Detaljer