PH Meter Calibration Solution ORP Tester Calibration Solution Buffer Solutions,ORP 222mV
På lager
Derfor vil du elske at handle hos OnBuy:
- Tjen Cashback på hvert køb – brug det med det samme på din næste ordre
- Gratis levering – på millioner af varer på siden
- Kunder elsker os – 138,000 anmeldelser med vurderingen “Fremragende”
Priserne for varer, der sælges af OnBuy, inkluderer moms.
Rentefrie betalingsmuligheder
Se fuld produktbeskrivelse og detaljer
Levering: Standard (Gratis) | man. 23. - fre. 27. nov.
Solgt af: JJBRDZ
Returnering: 30 dage
180 dages betalingsbeskyttelse
Du kan også lide
Oversigt
- How to Calibrate the ORP Meter:1.Press ON/OFF button to turn on the meter, take off the protective cap and rinse off the probe with pure water and dry it.
- 2. Press the "MODE/CAL" button to set the ORP mode; the word "mV" will be displayed at the top right of the screen. Put the probe into 222mV calibration solution and shake it gently.
- 3. Wait until the reading is stable, then long press"MODE/CAL" for 5 seconds and release; CAL is displayed on the screen, then a value will flash 3 times on the screen, when the value starts to fiash, press "MODE/CAL" button ( lf the flashing value is higher than 222mV ) or "HOLD/TEMP" button ( lf the flashing value is lower than 222mV ).
- 4. After adjusting the displaying value to 222mV then release the button, waiting the reading stop flashing,the calibration is finished, rinse off the probe with water.
- Calibration Solution
PH Meter Calibration Solution ORP Tester Calibration Solution Buffer Solutions,ORP 222mV Beskrivelse
How to Calibrate the ORP Meter:1.Press /OFF button to turn the meter, take off the protective cap and rinse off the probe with pure water and dry it.
2. Press the "MODE/CAL" button to set the ORP mode; the word "mV" will be displayed at the top right of the screen. Put the probe into 222mV calibration solution and shake it gently.
3. Wait until the reading is stable, then long press"MODE/CAL" Compatible?with 5 seconds and release; CAL is displayed the screen, then a value will flash 3 times the screen, when the value starts to fiash, press "MODE/CAL" button ( lf the flashing value is higher than 222mV ) or "HOLD/TEMP" button ( lf the flashing value is lower than 222mV ).
4. After adjusting the displaying value to 222mV then release the button, waiting the reading stop flashing,the calibration is finished, rinse off the probe with water.
Storage:
Buffer solutions should be stored in a dark, cool place (not in the refrigerator and at temperatures no higher than 25C) away from direct sunlight to prevent photochemical degradation. In addition, buffer calibration solutions should be protected from carbon dioxide from the air and stored in tightly closed containers.
Colour:As Shown
Material:plastic
type:ORP 222mV
Package Contents:
1 set x pH Meter
Detaljer
| OPC | PYTT7H8 |
|---|---|
| Mærke | Torribaly |
| Koder | 4711602661211 (EAN) |
| Produkt- og sikkerhedsoplysninger |
Produktdata
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.07kg |
| Colour | As Shown |
| Size | ORP 222mV |
| Material | plastic |
Sammenlign sælgere for PH Meter Calibration Solution ORP Tester Calibration Solution Buffer Solutions,ORP 222mV
- Ny fra 206,62 kr.
| Sælger | Bedømmelser | Garanti | Returneringer | Pris | Levering | I alt | Antal |
|---|---|---|---|---|---|---|---|
|
Afsendt fra:
|
(525 anmeldelser) | - |
30 dage
Gratis retur Nej
|
206,62 kr.
|
+Free Delivery
Forventet levering:
23-27 nov.
|
206,62 kr.
|
Tjen penge, mens du handler med øjeblikkelig Cashback på alt.
Ingen hage, ingen omkostninger
- Indbetalt til din OnBuy-konto
- Brug dem på dit næste køb
- Gem det eller hæv det
Bliv Cashback VIP
Bare 1 køb giver adgang til bedre tilbud og priser