Tuotekuvat
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
Brändi Typecat
Uusi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 137,000 arvostelua arvosanalla “Erinomainen”
19,74 €
31,73 €
Alennus 38%!
+1,98 € Toimitus
1%
Mitä on välitön Cashback?
Lue lisää
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (1,98 €) | ke 11. - ma 16. marras
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Kuvaus ja tiedot
Yhteenveto
- This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
- The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
- Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V DC. This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
- The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
- This module is widely used in smart car balance control, line-following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car Kuvaus
This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V . This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
This module is widely used in car balance control, -following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
Product parameter:
Product name: Six-axis gyroscope 1CM-20602
Power supply: 3.3-5V (with LD0 voltage regulator chip)
Communication method: support 11C and SPl (10M bit rate) communication protocol
Gyro range: soil 250 500 1000 2000/s Acceleration range: soil 2 soil 4 soil 8 soil 16g
Pin spacing: 2.54mm
Product parameters: Chip built-in 16bit AD converter,
Tiedot
| OPC | PYF97GQ |
|---|---|
| Brändi | Typecat |
| Koodit | 4712189773526 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 1cm |
|---|---|
| Width | 3cm |
| Length | 6cm |
| Weight | 0.002kg |
| Colour | Black |
| Material | Plastic |
Vertaile myyjiä tuotteelle ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
- Uusi alkaen 21,72 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(510 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
19,74 €
|
+1,98 € Delivery
Arvioitu toimitus:
11-16 marras
|
21,72 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset