Εικόνες προϊόντος
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
Μάρκα Typecat
Νέο
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 137,000 κριτικές με βαθμολογία « Άριστα »
16,72 €
28,99 €
Έκπτωση 42%!
+1,98 € Παράδοση
1%
Τι είναι το άμεσο Cashback;
Μάθετε περισσότερα
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (1,98 €) | Πεμ 12 - Τρι 17 Νοε
Πωλείται από: Papishop
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Περιγραφή & Λεπτομέρειες
Περίληψη
- This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
- The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
- Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V DC. This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
- The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
- This module is widely used in smart car balance control, line-following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car Περιγραφή
This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V . This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
This module is widely used in car balance control, -following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
Product parameter:
Product name: Six-axis gyroscope 1CM-20602
Power supply: 3.3-5V (with LD0 voltage regulator chip)
Communication method: support 11C and SPl (10M bit rate) communication protocol
Gyro range: soil 250 500 1000 2000/s Acceleration range: soil 2 soil 4 soil 8 soil 16g
Pin spacing: 2.54mm
Product parameters: Chip built-in 16bit AD converter,
Λεπτομέρειες
| OPC | PYF97GQ |
|---|---|
| Μάρκα | Typecat |
| Κωδικοί | 4712189773526 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 1cm |
|---|---|
| Width | 3cm |
| Length | 6cm |
| Weight | 0.002kg |
| Colour | Black |
| Material | Plastic |
Σύγκρινε Πωλητές για ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
- Νέο από 18,70 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(513 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
16,72 €
|
+1,98 € Delivery
Εκτ. Παράδοση:
12-17 Νοε
|
18,70 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά