Termékképek
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
Márka: Typecat
Új
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 137,000 Kiváló értékelést kaptunk!
7 244,17 Ft
9 938,63 Ft
27% kedvezmény!
+743,50 Ft szállítás
1%
Szerezzen azonnal 72,44 Ft összeget
Tudj meg többet
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (743,50 Ft) | csüt 12. - kedd 17. nov.
Eladó: Papishop
Visszaküldés: 30 nap
180 napos fizetési védelem
Ez is érdekelhet
Leírás és részletek
Összefoglaló
- This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
- The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
- Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V DC. This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
- The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
- This module is widely used in smart car balance control, line-following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car leírása
This module integrates the ICM-20602 six-axis motion sensor, providing three-axis gyroscope and three-axis accelerometer functions in a single compact board. It is designed as an upgraded replacement for the classic MPU-6050, offering improved accuracy and stability for motion detection and attitude measurement.
The board layout and interface design allow it to be used as a drop-in replacement for many MPU-6050 applications. It supports similar communication methods and pin definitions, making it easier to upgrade existing projects to obtain better motion sensing performance without large hardware changes.
Built-in voltage regulation and level adaptation circuits enable flexible power supply options between 3.3V and 5V . This makes the module compatible with a wide range of development boards and control systems, including 3.3V and 5V logic platforms, reducing design complexity.
The ICM-20602 provides high-resolution measurement of angular velocity and acceleration, suitable for fine motion capture, angle detection, vibrations analysis, and posture control. The low noise design helps to improve measurement accuracy and dynamic response in demanding applications.
This module is widely used in car balance control, -following correction, steering stabilization, and attitude feedback. It is also suitable for various robotics platforms, such as self-balancing robots, robotic arm, and educational robots, offering reliable motion sensing capabilities.
Product parameter:
Product name: Six-axis gyroscope 1CM-20602
Power supply: 3.3-5V (with LD0 voltage regulator chip)
Communication method: support 11C and SPl (10M bit rate) communication protocol
Gyro range: soil 250 500 1000 2000/s Acceleration range: soil 2 soil 4 soil 8 soil 16g
Pin spacing: 2.54mm
Product parameters: Chip built-in 16bit AD converter,
Részletek
| OPC | PYF97GQ |
|---|---|
| Márka | Typecat |
| Kódok | 4712189773526 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 1cm |
|---|---|
| Width | 3cm |
| Length | 6cm |
| Weight | 0.002kg |
| Colour | Black |
| Material | Plastic |
Eladók összehasonlítása: ICM-20602 Sensor Module Replaces MPU-6050 High-Precision Six Axis Gyroscope Acceleration Module DC3.3-5V for Car
- Új innen 7 987,67 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(512 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
7 244,17 Ft
|
+743,50 Ft Delivery
Várható szállítás:
12-17 nov.
|
7 987,67 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el