IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 132,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (3,00 €) | to 3. - ti 8. syys
Myyjä: BALURE
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- for The Arduino interface is fully compatible with extensions. for Arduino communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. Up to four DC brush motors or two four-wire stepper motors can be connected.
- Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A peak, peak L298N module.
- TB6612MOSFET driver: 1.2A and 3A peak current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver on the chip. This chip handles all the motor and speed control on the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
- Servo Shield v2 Driver
- DC Stepper Motor Driver Module
IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for Kuvaus
for The interface is fully compatible with extensions. for communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. to four brush motors or two four-wire stepper motors can be connected.
Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A , L298N module.
TB6612MOSFET driver: 1.2A and 3A current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver the chip. This chip handles all the motor and speed control the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
Supply Voltage: 8-35V
Logic Voltage: 5~12V
Reference Voltage: 5.5V
Output -Resistance: 320-430m ohms per driver
Diode Forward Voltage: 1.2V per driver
Output Current of the Driver: 2A
for Compatible: Yes
Product Dimensions: 6.8x5.2cm
Color: As Shown
Material: PCB
Package Contents:
1 * TB6612 Stepper Motor Driver Module
Tiedot
| OPC | PXJJSM2 |
|---|---|
| Brändi | Jojomino |
| Koodit | 6033366937592 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 7cm |
| Weight | 0.0205kg |
| Colour | As Shown |
| Material | PCB |
Vertaile myyjiä tuotteelle IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
- Uusi alkaen 30,34 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(352 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
27,34 €
|
+3,00 € Delivery
Arvioitu toimitus:
3-8 syys
|
30,34 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset