IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
I lager
Varför du kommer att älska att handla på OnBuy:
- Tjäna Cashback på varje köp – använd den hur du vill. Spara, spendera eller ta ut.
- Fri frakt – på miljontals produkter på sajten
- Kunder älskar oss – 132,000 recensioner med betyget “Utmärkt”
Priserna för varor som säljs av OnBuy inkluderar moms.
Räntefria betalningsalternativ finns tillgängliga
Se fullständig produktbeskrivning och detaljer
Leverans: Standard (47,00 kr) | mån 7e - lör 12e sep
Säljs av: BALURE
Returer: 30 dagar
180 dagars betalningsskydd
Du kanske också gillar
Sammanfattning
- for The Arduino interface is fully compatible with extensions. for Arduino communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. Up to four DC brush motors or two four-wire stepper motors can be connected.
- Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A peak, peak L298N module.
- TB6612MOSFET driver: 1.2A and 3A peak current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver on the chip. This chip handles all the motor and speed control on the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
- Servo Shield v2 Driver
- DC Stepper Motor Driver Module
IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for Beskrivning
for The interface is fully compatible with extensions. for communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. to four brush motors or two four-wire stepper motors can be connected.
Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A , L298N module.
TB6612MOSFET driver: 1.2A and 3A current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver the chip. This chip handles all the motor and speed control the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
Supply Voltage: 8-35V
Logic Voltage: 5~12V
Reference Voltage: 5.5V
Output -Resistance: 320-430m ohms per driver
Diode Forward Voltage: 1.2V per driver
Output Current of the Driver: 2A
for Compatible: Yes
Product Dimensions: 6.8x5.2cm
Color: As Shown
Material: PCB
Package Contents:
1 * TB6612 Stepper Motor Driver Module
Detaljer
| OPC | PXJJSM2 |
|---|---|
| Varumärke | Jojomino |
| Koder | 6033366937592 (EAN) |
| Produkt- och säkerhetsinformation |
Produktdata
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 7cm |
| Weight | 0.0205kg |
| Colour | As Shown |
| Material | PCB |
Jämför säljare för IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
- Ny från 325,37 kr
| Säljare | Betyg | Garanti | Returer | Pris | Leverans | Totalt | Antal |
|---|---|---|---|---|---|---|---|
|
Skickas från:
|
(352 recensioner) | - |
30 dagar
Gratis returer Nej
|
278,37 kr
|
+47,00 kr Delivery
Beräknad leverans:
7-12 sep
|
325,37 kr
|
Tjäna medan du handlar med omedelbar Cashback på allt.
Inga krångel, ingen kostnad
- Betalas in på ditt OnBuy-konto
- Använd det vid ditt nästa köp
- Spara det eller ta ut det
Bli en Cashback VIP
Bara 1 köp låser upp bättre erbjudanden och priser