12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 139,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (5 501,38 Ft) | sze 2. - kedd 8. dec.
Visszaküldés: 30 nap
180 napos fizetési védelem
Ez is érdekelhet
Összefoglaló
- wear resistant, high hardness, has a long service life.
- Widely used for small devices such as equipment, engraving machine, etc.
- DIY installation process can improve your hands-on ability.
- The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
- The maximum linear speed is 25mm per second.
12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine leírása
wear resistant, high hardness, has a long service life.
Widely used for small devices such as equipment, engraving machine, etc.
DIY installation process can improve your hands- ability.
The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
The maximum linear speed is 25mm per second.
Material: metal
Color: silver
Model: D8-MOTOR80
Rated voltage: 9-12V
Thread rod diameter: 3mm / 0.1in
Thread rod length: 90mm / 3.5in
Slider block stroke: 80mm / 3.1in
Drive mode: bipolar drive
Thread rod pitch: 0.5mm / 0.02in (Moving 0.025mm for one step, can use microstep driver if needs smaller)
Drive voltage: 12V
Current per phase: 800 ma/phase
Coil resistance: 15 10%Ω/phase
No.of phases: 2 phases
Step angle: 18 ./step
Excitation method: 1-2 phase excitation
Pull-out thrust: 500g above at 125pps
Max response frequency: 1600 pps above
Max starting frequency: 1100 pps above
Insulation class: class E
Insulation strength: 100V AC one second
Insulation resistance: 50M 500V
Operating temperature: 0~+55
Motor surface temperature: 80
Item size: 105 * 15mm / 4.1 * 0.6in
Item weight: 46g / 1.6ounce
Note:
The motor needs to be driven by the driver, not directly connected to the power.
Package list:
1 * Motor with Linear Slide
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Részletek
| OPC | PXF9KVN |
|---|---|
| Kódok | 6032888749737 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 2cm |
|---|---|
| Width | 3cm |
| Length | 10.5cm |
| Weight | 0.046kg |
| Colour | silver |
| Material | metal |
Eladók összehasonlítása: 12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine
- Új innen 8 899,88 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(152 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
3 398,50 Ft
|
+5 501,38 Ft Delivery
Várható szállítás:
2-8 dec.
|
8 899,88 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el