12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine
Dostępny
Dlaczego pokochasz zakupy na OnBuy:
- Zyskaj cashback przy każdym zakupie – wykorzystaj go od razu przy następnym zamówieniu
- Bezpłatna dostawa – przy milionach produktów w całym serwisie
- Klienci nas uwielbiają – 139,000 opinii z oceną “Doskonała”
Podane ceny zawierają podatek VAT (tam, gdzie ma to zastosowanie)
Dostępne opcje płatności bez odsetek
Zobacz pełny opis i szczegóły produktu
Dostawa: Standard (50,18 zł) | śr 2. - wt 8. gru
Zwroty: 30 dni
Ochrona płatności przez 180 dni
To też może Ci się spodobać
Podsumowanie
- wear resistant, high hardness, has a long service life.
- Widely used for small devices such as equipment, engraving machine, etc.
- DIY installation process can improve your hands-on ability.
- The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
- The maximum linear speed is 25mm per second.
Opis produktu: 12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine
wear resistant, high hardness, has a long service life.
Widely used for small devices such as equipment, engraving machine, etc.
DIY installation process can improve your hands- ability.
The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
The maximum linear speed is 25mm per second.
Material: metal
Color: silver
Model: D8-MOTOR80
Rated voltage: 9-12V
Thread rod diameter: 3mm / 0.1in
Thread rod length: 90mm / 3.5in
Slider block stroke: 80mm / 3.1in
Drive mode: bipolar drive
Thread rod pitch: 0.5mm / 0.02in (Moving 0.025mm for one step, can use microstep driver if needs smaller)
Drive voltage: 12V
Current per phase: 800 ma/phase
Coil resistance: 15 10%Ω/phase
No.of phases: 2 phases
Step angle: 18 ./step
Excitation method: 1-2 phase excitation
Pull-out thrust: 500g above at 125pps
Max response frequency: 1600 pps above
Max starting frequency: 1100 pps above
Insulation class: class E
Insulation strength: 100V AC one second
Insulation resistance: 50M 500V
Operating temperature: 0~+55
Motor surface temperature: 80
Item size: 105 * 15mm / 4.1 * 0.6in
Item weight: 46g / 1.6ounce
Note:
The motor needs to be driven by the driver, not directly connected to the power.
Package list:
1 * Motor with Linear Slide
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specyfikacja
| OPC | PXF9KVN |
|---|---|
| Kody | 6032888749737 (EAN) |
| Informacje o produkcie i bezpieczeństwie |
Dane produktu
| Height | 2cm |
|---|---|
| Width | 3cm |
| Length | 10.5cm |
| Weight | 0.046kg |
| Colour | silver |
| Material | metal |
Porównaj sprzedawców dla: 12V Stepper Motor Stroke 80Mm With Slider Motor For Diy Small Engraving Machine
- Nowy od 112,12 zł
| Sprzedawca | Oceny | Gwarancja | Zwroty | Cena | Dostawa | Łącznie | Sztuk |
|---|---|---|---|---|---|---|---|
|
Wysyłka z:
|
[2,4] (152 opinie) | - |
30 dni
Darmowe zwroty Nie
|
61,94 zł
|
+50,18 zł Delivery
Przewidywana dostawa:
2-8 gru
|
112,12 zł
|
Zyskuj na zakupach dzięki natychmiastowemu Cashbackowina wszystko.
Bez ukrytych kosztów
- Środki przekazane na konto OnBuy
- Wykorzystaj przy kolejnym zakupie
- Oszczędzaj lub wypłacaj
Zostań Cashback VIP
Tylko 1 zakup odblokowuje lepsze oferty i wyższy zwrot