Cashback piactér Pénzvisszatérítés minden vásárlás után Ingyenes házhozszállítás több millió termékre Magasra értékelt Kiváló értékelések a Trustpiloton Legyen Cashback VIP-tag Nagyobb visszatérítés, még jobb ajánlatok 30 napos visszaküldési lehetőség Plus Vásárlásvédelem

Sajnáljuk, ez a termék átmenetileg nincs raktáron.

2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for

Name: 2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for
Brand: Bobotron
SKU: PYBJZYY
Availability: OutOfStock

Márka: Bobotron

Új

További termékek, amelyek érdekelhetnek

Számítógépes monitor tartó és állványok

Szeretnéd, ha tudatnánk veled, ha újra elérhető lesz?

Kosárba

Leírás és részletek

Összefoglaló

The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Microphone Module

2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for leírása

The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.

Color:
Material: Plastic+Metal

Package Contents:
2 x Microphone Module

Részletek