Marketplace-ul cu Cashback Câștiguri instant la orice achiziție Livrare gratuită la milioane de produse Foarte bine evaluat Recenzii excelente pe Trustpilot Deveniți membru VIP Cashback Rate mai mari, oferte mai bune Returnare în 30 de zile Plus protecție la achiziție

Ne pare rău, acest articol este temporar indisponibil.

2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for

Name: 2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for
Brand: Bobotron
SKU: PYBJZYY
Availability: OutOfStock

Brand Bobotron

Nou

Produse similare care te-ar putea interesa

Suporturi și suporturi pentru monitoare de calculator

Ai vrea să te anunțăm când revine?

Adaugă în coș

Descriere & Detalii

Rezumat

The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Microphone Module

Descriere 2X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for

The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.

Color:
Material: Plastic+Metal

Package Contents:
2 x Microphone Module

Detalii