SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 139,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (3 800 Ft) | szo 5. - pén 11. dec.
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- High-precision current sensing using the ACS723 chip for both AC and DC applications.
- Measures currents up to 5A with complete electrical isolation between the measured and sensed circuits.
- Base sensitivity of 400mV/A, adjustable analog output up to 80kHz.
- Wideband filter setting tuned to 20kHz to reduce noise during high-gain use.
- Rated isolation voltage of up to 2.4kV (RMS), though the circuit board is not designed for high-voltage applications.
SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated leírása
High-precision current sensing using the ACS723 chip for both AC and applications.
Measures currents to 5A with complete electrical isolation between the measured and sensed circuits.
Base sensitivity of 400mV/A, adjustable analog output to 80kHz.
Wideband filter setting tuned to 20kHz to reduce noise during high-gain use.
Rated isolation voltage of to 2.4kV (RMS), though the circuit board is not designed for high-voltage applications.
The SparkFun Current Sensor Board is a high-precision circuit board that uses the ACS723 chip for medium-range AC and current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage corresponding to the current flowing through the IP+ and IP- pins the board. One advantage of using a Hall effect sensor is that the sensed circuit and the circuit reading the sensor signal are electrically isolated, meaning that even if your is running at 5V, the sensed circuit can operate at higher or AC voltages. The SparkFun Current Sensor Expansion Board can simultaneously measure and AC currents to 5A. Although the analog output is adjustable to 80kHz, the ACS723 sensor expansion board's wideband filter setting is tuned to 20kHz to reduce noise during high-gain use. The sensor's actual full 80kHz wideband can be recovered by closing the JP1 (band selection) jumper cap the back of the board.
Color: As Shown
Material: PCB
Package Contents:
1 * ACS723 Sensor Module
Részletek
| OPC | PV99CXG |
|---|---|
| Kódok | 6031722866357 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 3cm |
|---|---|
| Width | 4cm |
| Length | 1cm |
| Weight | 0.015kg |
| Colour | As Shown |
| Material | PCB |
Customers also buy
Eladók összehasonlítása: SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated
- Új innen 23 572 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(205 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
19 772 Ft
|
+3 800 Ft Delivery
Várható szállítás:
5-11 dec.
|
23 572 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el