SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 139,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (100,22 RON) | mar 8 - lun 14 dec.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Te-ar putea interesa și
Rezumat
- High-precision current sensing using the ACS723 chip for both AC and DC applications.
- Measures currents up to 5A with complete electrical isolation between the measured and sensed circuits.
- Base sensitivity of 400mV/A, adjustable analog output up to 80kHz.
- Wideband filter setting tuned to 20kHz to reduce noise during high-gain use.
- Rated isolation voltage of up to 2.4kV (RMS), though the circuit board is not designed for high-voltage applications.
Descriere SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated
High-precision current sensing using the ACS723 chip for both AC and applications.
Measures currents to 5A with complete electrical isolation between the measured and sensed circuits.
Base sensitivity of 400mV/A, adjustable analog output to 80kHz.
Wideband filter setting tuned to 20kHz to reduce noise during high-gain use.
Rated isolation voltage of to 2.4kV (RMS), though the circuit board is not designed for high-voltage applications.
The SparkFun Current Sensor Board is a high-precision circuit board that uses the ACS723 chip for medium-range AC and current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage corresponding to the current flowing through the IP+ and IP- pins the board. One advantage of using a Hall effect sensor is that the sensed circuit and the circuit reading the sensor signal are electrically isolated, meaning that even if your is running at 5V, the sensed circuit can operate at higher or AC voltages. The SparkFun Current Sensor Expansion Board can simultaneously measure and AC currents to 5A. Although the analog output is adjustable to 80kHz, the ACS723 sensor expansion board's wideband filter setting is tuned to 20kHz to reduce noise during high-gain use. The sensor's actual full 80kHz wideband can be recovered by closing the JP1 (band selection) jumper cap the back of the board.
Color: As Shown
Material: PCB
Package Contents:
1 * ACS723 Sensor Module
Detalii
| OPC | PV99CXG |
|---|---|
| Coduri | 6031722866357 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 3cm |
|---|---|
| Width | 4cm |
| Length | 1cm |
| Weight | 0.015kg |
| Colour | As Shown |
| Material | PCB |
Customers also buy
Compară vânzătorii pentru SparkFun Current Sensor Breakout ACS723 5A AC/ Current Sensing Board 400mV/A Sensitivity Isolated
- Nou de la 364,26 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(205 recenzii) | - |
30 zile
Retur gratuit Nu
|
264,03 RON
|
+100,22 RON Delivery
Livrare estimată:
8-14 dec.
|
364,26 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase




