Termékképek
Sorry, this item is temporarily out of stock.
STM32C0316-DK Development Kit Development Board for MCU Evaluation and Embedded Prototyping
Brand kepptory
New
További termékek, amelyek érdekelhetnek
Would you like us to let you know when it's back?
Leírás és részletek
Összefoglaló
- STMicroelectronics STM32C0316-DK Explorer Kit provides alternative features to the corresponding NUCLEO-C031C6 board, allowing users to access the standard 20-pin layout of the STM32C0 microcontroller. Users can cover the SWD debug pins by disconnecting the debug probe.
- The 5-way analog rocker switch and LEDs can be replaced by a slide switch. All pins are supported by DIP28 connectors. The connector type is user-selectable. A 32768Hz onboard 1-pin clock generator for the RTC can be disconnected using a slide switch.
- The STM32C0316-DK Explorer Kit facilitates migration from 8-bit to STM32C0 microcontrollers and between STM32C0 and STM32G0 microcontrollers.
- The DIP28 pinout is designed for maximum compatibility with the ATmega328 8-bit microcontroller; the LQFP48 is compatible with the STM32G031/071/0B1 microcontrollers; the UFQFPN20 is compatible with the STM32C01 microcontroller; and finally, the WLCSP20 is compatible with the STM32G051 microcontroller.
- A 5V to 3.3V regulator is bypassed when the supply voltage exceeds 3.3V. A debug probe level shifter modifies the debug signal level to the target microcontroller supply voltage.
STM32C0316-DK Development Kit Development Board for MCU Evaluation and Embedded Prototyping leírása
STMicroelectronics STM32C0316-DK Explorer Kit provides alternative features to the corresponding NUCLEO-C031C6 board, allowing users to access the standard 20-pin layout of the STM32C0 microcontroller. Users can cover the SWD debug pins by disconnecting the debug probe.
The 5-way analog rocker and LEDs can be replaced by a slide . All pins are supported by DIP28 connectors. The connector type is user-selectable. A 32768Hz onboard 1-pin clock generator for the RTC can be disconnected using a slide .
The STM32C0316-DK Explorer Kit facilitates migration from 8-bit to STM32C0 microcontrollers and between STM32C0 and STM32G0 microcontrollers.
The DIP28 pinout is designed for maximum compatibility with the ATmega328 8-bit microcontroller; the LQFP48 is compatible with the STM32G031/071/0B1 microcontrollers; the UFQFPN20 is compatible with the STM32C01 microcontroller; and finally, the WLCSP20 is compatible with the STM32G051 microcontroller.
A 5V to 3.3V regulator is bypassed when the supply voltage exceeds 3.3V. A debug probe level shifter modifies the debug signal level to the target microcontroller supply voltage.
Features: 32768Hz onboard clock generator
1 user LED and 2 power LEDs
Reset button
5-way joystick with a single ADC input pin
Slide for easy disconnection of the embedded user demo component
Comprehensive free software library and examples included with the STM32Cube MCU software package
Board connectors:
USB Micro-B for 5V power
STMod+ connector
Bluetooth (HC05, 115200 bps) as a simple wireless serial adapter
Non-standard DIP28 compatible expansion connector
STDC14 debug connector for third-party debug probes
Two onboard side pads for BTB card connectors
Standalone STLINK-V3MINIE debugger/programmer miniature probe for STM32 microcont
Részletek
| OPC | PVZ92C6 |
|---|---|
| Márka | kepptory |
| Kódok | 6032787956533 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 10cm |
|---|---|
| Width | 10cm |
| Length | 10cm |
| Weight | 0.1kg |
| Colour | As Shown |
| Material | Plastic |
Would you like us to let you know when it's back?
STM32C0316-DK Development Kit Development Board for MCU Evaluation and Embedded Prototyping
New
Ez is érdekelhet