Produktbilder
2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
Merke Torribaly
Ny
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 130,000 anmeldelser med vurderingen “Utmerket”
597,38 kr
702,80 kr
15 % rabatt!
GRATIS levering
1%
Tjen 5,97 kr med én gang
Les mer
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | fre 14. - ons 19. aug
Solgt av: JJBRDZ
Returer: 30 dager
180 dagers betalingsbeskyttelse
Beskrivelse og detaljer
Sammendrag
- 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
- 3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a DC negative bus
- bar.
- 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
- 5. Mount the switch panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys Beskrivelse
1. Disconnect all power(AC& )Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire.Connect the .power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a negative bus
bar.
4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
5. Mount the panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& powers to supply power to the panel. Turn and off all branch circuits to check if the panel works normally.
Ratings: 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Colour: Black
Material: nylon + metal
Package Contents: 2 x Ignition Panel
4 x key
Detaljer
| OPC | PTRD6W8 |
|---|---|
| Merke | Torribaly |
| Koder | 6031418890826 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 15cm |
|---|---|
| Width | 7.5cm |
| Length | 8.5cm |
| Weight | 0.293kg |
| Colour | Black |
| Material | nylon + metal |
Sammenlign selgere for 2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
- Ny fra 597,38 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(447 anmeldelser) | - |
30 dager
Gratis retur Nei
|
597,38 kr
|
+Free Delivery
Estimert levering:
14-19 aug
|
597,38 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser