Obrázky produktu
2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
Značka Torribaly
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 131,000 hodnotení s “Vynikajúcim” hodnotením
52,52 €
67,33 €
22 % zľava!
BEZPLATNÉ doručenie
1%
Získajte 0,53 € okamžite
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | pia 21 - str 26 aug
Predáva: JJBRDZ
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Popis a podrobnosti
Zhrnutie
- 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
- 3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a DC negative bus
- bar.
- 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
- 5. Mount the switch panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys Popis
1. Disconnect all power(AC& )Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire.Connect the .power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a negative bus
bar.
4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
5. Mount the panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& powers to supply power to the panel. Turn and off all branch circuits to check if the panel works normally.
Ratings: 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Colour: Black
Material: nylon + metal
Package Contents: 2 x Ignition Panel
4 x key
Podrobnosti
| OPC | PTRD6W8 |
|---|---|
| Značka | Torribaly |
| Kódy | 6031418890826 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 15cm |
|---|---|
| Width | 7.5cm |
| Length | 8.5cm |
| Weight | 0.293kg |
| Colour | Black |
| Material | nylon + metal |
Porovnajte predajcov pre 2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
- Nové od 52,52 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(447 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
52,52 €
|
+Free Delivery
Odhadované doručenie:
21-26 aug
|
52,52 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy