3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 139,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (50,00 kr) | ons 2. - tir 8. des
Solgt av: CocoRabbit
Returer: 30 dager
180 dagers betalingsbeskyttelse
Du vil kanskje også like
Sammendrag
- Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
- Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
- Support motor: Supports XYZ three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to 100%, and also supports 3-pin PWM/TTL signal control module
- New features: Added 2-pin emergency stop button port, probe port, XYZ limit port, and added power button switch; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
- Important note: This is a control board, not plug and play. Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager>"Ports", verify if "USB-SERIAL CH340 (COMx)" appears.
3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router Beskrivelse
Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
Support motor: Supports three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to , and also supports 3-pin PWM/TTL signal control module
New features: Added 2-pin emergency stop button port, probe port, limit port, and added power button ; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
Important note: This is a control board, not plug and . Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager&"", verify if "USB-SERIAL CH340 (COMx)" appears.
Color: As Shown
Material: plastic
Package Contents:
1 * Engraving machine control board
Detaljer
| OPC | PYR6HNN |
|---|---|
| Koder | 4712866334286 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 4cm |
|---|---|
| Width | 15cm |
| Length | 18cm |
| Weight | 0.2kg |
| Colour | As Shown |
| Material | plastic |
Sammenlign selgere for 3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
- Ny fra 633,83 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(3 anmeldelser) | - |
30 dager
Gratis retur Nei
|
583,83 kr
|
+50,00 kr Delivery
Estimert levering:
2-8 des
|
633,83 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser