3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 139,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (200,00 RON) | vin 4 - joi 10 dec.
Vândut de: CocoRabbit
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Te-ar putea interesa și
Rezumat
- Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
- Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
- Support motor: Supports XYZ three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to 100%, and also supports 3-pin PWM/TTL signal control module
- New features: Added 2-pin emergency stop button port, probe port, XYZ limit port, and added power button switch; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
- Important note: This is a control board, not plug and play. Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager>"Ports", verify if "USB-SERIAL CH340 (COMx)" appears.
Descriere 3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
Model: Upgraded 3-axis GRBL 1.1F USB port GRBL control board; Input voltage: 24VDC
Supporting software: GRBL control/candle (3-axis)/universal Gcode transmitter;
Support motor: Supports three-axis control, spindle. Support stepper motor: 12V, recommended maximum current of 2A or less within 1.5A, and additional heating. (Any stepper motor Nema17, Nema23); Support spindle: Supports 24VDC spindle PWM speed from 0% to , and also supports 3-pin PWM/TTL signal control module
New features: Added 2-pin emergency stop button port, probe port, limit port, and added power button ; Application: This control board can be used in conjunction with engraving machines such as 13101610-PRO, 30183018-PRO, and 3018-PRO MAX
Important note: This is a control board, not plug and . Please connect 24VDC to the circuit board and then connect the USB to the PC. Driver: Install the CH340 driver. In Device Manager&"", verify if "USB-SERIAL CH340 (COMx)" appears.
Color: As Shown
Material: plastic
Package Contents:
1 * Engraving machine control board
Detalii
| OPC | PYR6HNN |
|---|---|
| Coduri | 4712866334286 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 4cm |
|---|---|
| Width | 15cm |
| Length | 18cm |
| Weight | 0.2kg |
| Colour | As Shown |
| Material | plastic |
Compară vânzătorii pentru 3 Axis CNC Engraving Machine Controller Board 150W, Offline/E-Stop/Probe/Limit for 3018-PRO/MAX CNC Router
- Nou de la 469,12 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(3 recenzii) | - |
30 zile
Retur gratuit Nu
|
269,12 RON
|
+200,00 RON Delivery
Livrare estimată:
4-10 dec.
|
469,12 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase