Przepraszamy, ten produkt jest chwilowo niedostępny.
New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure
Podobne produkty, które mogą Cię zainteresować
Czy chcesz, żebyśmy Cię poinformowali, kiedy usługa będzie dostępna?
Podsumowanie
- Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable)
- Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on.
- Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
- Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted.
- Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption:
Opis produktu: New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure
Air Conditioner Start- Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start- command every 30 minutes to ensure the air conditioner is always .
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns , the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back . The controller will automatically send a start- command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: -5V; Standby Power Consumption:
Specyfikacja
| OPC | PVVK2YM |
|---|---|
| Marka | Tlily |
| Kody | 4713642560332 (EAN) |
| Informacje o produkcie i bezpieczeństwie |
Dane produktu
| Height | 3cm |
|---|---|
| Width | 5cm |
| Length | 10cm |
| Weight | 0.055kg |
| Colour | Transparent Color |
| Material | Plastic |