Extruder Breakout Board Support Canbus Without MAX31865 for U2C Ender3 3D Printer Mainboard Klipper Expansion EBB36
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 132,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (55,92 RON) | mar 8 - lun 14 sept.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Te-ar putea interesa și
Rezumat
- 1. With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
- 2. Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from the heating rod.
- 3. Connect the USB witha jumper cap to get it power on, which effectively isolates the main control board DC-DC from USB 5V.
- 4. Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions.
- 5. Added anti-flyback diodes on the heating rod and fans' ports effectively protect the MOS tube from being burned due to reverse voltage.
Descriere Extruder Breakout Board Support Canbus Without MAX31865 for U2C Ender3 3D Printer Mainboard Klipper Expansion EBB36
1. With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
2. Added protection circuit the thermistor avoids burning the main control chip caused by leakage current from the heating rod.
3. Connect the USB witha jumper cap to get it power , which effectively isolates the main control board - from USB 5V.
4. Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions.
5. Added anti-flyback diodes the heating rod and fans' effectively protect the MOS tube from being burned due to reverse voltage.
6. Anti-reverse connection protection the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power during DIY.
Specifications:
External Dimensions: 40mmx 40mm
Installation Dimensions:Hole spacing 31mmx 31mm, M3 screw holex 4
Microprocessor: ARM Cortex-M0 STM32F072C8T6 48MHz
Input Voltage: DC12V-DC24V 9A
Logic Voltage: 3.3V
Heating Interface: Heating Rod (E0), maximum output current: 5A
Onboard Sensor: ADXL345
Colour:As shown
Material:PCB
style:EBB36
note:Without MAX31865
Due to different batches, there may be differences in product appearance and printed text, which will not affect use
Package Contents:
1 * Extruder Breakout Board Kit
Detalii
| OPC | PWD5VDG |
|---|---|
| Coduri | 6033733792038 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 3cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.046kg |
| Colour | As Shown |
| Size | Ebb36 |
| Material | PCB |
Compară vânzătorii pentru Extruder Breakout Board Support Canbus Without MAX31865 for U2C Ender3 3D Printer Mainboard Klipper Expansion EBB36
- Nou de la 166,52 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(133 recenzii) | - |
30 zile
Retur gratuit Nu
|
110,60 RON
|
+55,92 RON Delivery
Livrare estimată:
8-14 sept.
|
166,52 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase