LiIon or LiPoly Charger Module BFF Add- for QT Py for Adafruit
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 129,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (35,05 RON) | mie 29 iul. - mar 4 aug.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Cele mai populare în Încărcătoare de baterii casnice
Rezumat
- This little lipo charger is designed to fit onto the back of any QT Py board, and make it easy for portable powering. Simply plug any standard 3.7V/4.2V lithium polymer or lithium-ion rechargeable battery into the JST plug on the end. We include some header that you can solder to your QT Py.
- When powered by the USB port on the QT Py, the charger kicks in and will charge up the battery at 200mA max rate. You'll see the yellow LED light up when that happens.
- When the USB is removed, the battery will reverse charge into the 5V port via a Schottky diode. You can turn it on or off with the built in slide switch as well.
- A simple voltage divider on the cathode side of the diode and connected to pin A2 will let your firmware detect basic modes: if the voltage is over 4.3V, it is probably plugged into USB. If the voltage is 4.2V or below its probably running on the Lipoly battery and you can roughly determine the battery state.
- For use with LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity, or pinout.
Descriere LiIon or LiPoly Charger Module BFF Add- for QT Py for Adafruit
This little lipo charger is designed to fit onto the back of any QT Py board, and make it easy for portable powering. Simply plug any standard 3.7V/4.2V lithium polymer or lithium-ion rechargeable battery into the JST plug the end. We include some header that you can solder to your QT Py.
When powered by the USB port the QT Py, the charger kicks in and will charge the battery at 200mA max rate. You'll see the yellow LED light when that happens.
When the USB is removed, the battery will reverse charge into the 5V port via a Schottky diode. You can turn it or off with the built in slide as well.
A simple voltage divider the cathode side of the diode and connected to pin A2 will let your firmware detect basic modes: if the voltage is over 4.3V, it is probably plugged into USB. If the voltage is 4.2V or below its probably running the Lipoly battery and you can roughly determine the battery state.
For use with LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity, or pinout.
Uses the 5V input via USB Type-C connector QT Py
For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
200mA charge current
Color: Black
Material: PCB
Package Contents:
1 * Module
Detalii
| OPC | PWMKHN7 |
|---|---|
| Coduri | 6032694930930 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 5cm |
|---|---|
| Width | 10cm |
| Length | 10cm |
| Weight | 0.005kg |
| Colour | Black |
| Material | PCB |
Compară vânzătorii pentru LiIon or LiPoly Charger Module BFF Add- for QT Py for Adafruit
- Nou de la 104,40 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(131 recenzii) | - |
30 zile
Retur gratuit Nu
|
69,35 RON
|
+35,05 RON Delivery
Livrare estimată:
29 iul. - 4 aug.
|
104,40 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase