5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 130,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (4,04 €) | štv 6 - uto 11 aug
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Čistič šošoviek CD
Zhrnutie
- The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
- You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
- This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
- Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
- Microphone Module
5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi Popis
The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal
Package Contents:
5 x Microphone Module
Podrobnosti
| OPC | PWK9MDB |
|---|---|
| Značka | Exogio |
| Kódy | 6031666973661 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 5cm |
|---|---|
| Width | 1cm |
| Length | 1cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Plastic+Metal |
Porovnajte predajcov pre 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
- Nové od 36,34 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(115 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
32,30 €
|
+4,04 € Delivery
Odhadované doručenie:
6-11 aug
|
36,34 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy