Obrázky produktu
Taidacent 0 to 60 Minutes Delay Timer Relay 12V Multifunction Relay Module Normally Open Relay 10A Load MCU Control
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 136,000 hodnotení s “Vynikajúcim” hodnotením
7,36 €
11,05 €
33 % zľava!
+4,00 € doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (4,00 €) | sob 24 - pia 30 okt
Predáva: najlepšie
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Popis a podrobnosti
Zhrnutie
- This module is a normally open type, press the switch once, the relay will be turned on immediately, and will be turned off when the set time is reached. The timing from 0 seconds to 1 hour can be set, and 64 time values can be set.
- 1. Turn on after triggering, turn off after delay. Configuration method: trigger the termination button, S6 is disconnected.
- 2. Delay after trigger, turn on after the time is reached. Configuration method: trigger button, S6 connection.
- 3. After the module is energized, it will be turned on immediately, and it will be turned off after the delay is reached. Configuration method: short-circuit the trigger terminal and disconnect S6.
- 4. After the module is energized, (the contact is off), it will delay immediately when it opens, and it will turn on after the delay arrives. Configuration method: short-circuit the trigger terminal and connect S6.
Taidacent 0 to 60 Minutes Delay Timer Relay 12V Multifunction Relay Module Normally Open Relay 10A Load MCU Control Popis
This module is a normally open type, press the once, the relay will be turned immediately, and will be turned off when the set is reached. The timing from 0 seconds to 1 hour can be set, and 64 values can be set.
1. Turn after triggering, turn off after delay. Configuration method: trigger the termination button, S6 is disconnected.
2. Delay after trigger, turn after the is reached. Configuration method: trigger button, S6 connection.
3. After the module is energized, it will be turned immediately, and it will be turned off after the delay is reached. Configuration method: short-circuit the trigger terminal and disconnect S6.
4. After the module is energized, (the contact is off), it will delay immediately when it opens, and it will turn after the delay arrives. Configuration method: short-circuit the trigger terminal and connect S6.
Color: As Shown
Material: PCB+Electronic Components+Plastic
Package Contents:
1*Delay Timer Relay kit
Podrobnosti
| OPC | PWSVNZR |
|---|---|
| Kódy | 6033267609758 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 8cm |
|---|---|
| Width | 8cm |
| Length | 10cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | PCB+Electronic Components+Plastic |
Porovnajte predajcov pre Taidacent 0 to 60 Minutes Delay Timer Relay 12V Multifunction Relay Module Normally Open Relay 10A Load MCU Control
- Nové od 11,36 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(325 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
7,36 €
|
+4,00 € Delivery
Odhadované doručenie:
24-30 okt
|
11,36 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy