For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
Skladem
Proč si zamilujete nakupování na OnBuy:
- Získejte Cashback při každém nákupu – využijte jej okamžitě při další objednávce
- Doprava zdarma – u milionů položek na celém webu
- Zákazníci nás mají rádi – 127,000 recenzí s hodnocením “Vynikající”
Ceny zboží prodávaného na OnBuy jsou zobrazeny včetně DPH.
Možnosti platby bez úroků k dispozici
Zobrazit kompletní popis a podrobnosti o produktu
Doručení: Standardní (36,21 Kč) | čtv 2 - stř 8 čvc
Prodává: Papishop
Vrácení zboží: 30 dní
180denní ochrana platby
Nejoblíbenější v kategorii vlákna pro 3D tiskárny
Shrnutí
- This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
- The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
- Since the for ECAS sits now on the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife on the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next time.
- for ERCF V2
- ERCF Filament Cutter Kit for ERCF V2
For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo Popis
This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
Since the for ECAS sits now the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next .
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Consumables cutter kit
Podrobnosti
| OPC | PV87ZJ8 |
|---|---|
| Značka | Typecat |
| Kódy | 4713230081034 (EAN) |
Produktová data
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 12.5cm |
| Weight | 0.103kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Porovnejte prodejce pro For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
- Nové od 432,16 Kč
| Prodejce | Hodnocení | Záruka | Vrácení zboží | Cena | Doručení | Celkem | Množství |
|---|---|---|---|---|---|---|---|
|
Odesláno z:
|
(410 recenzí) | - |
30 dní
Vrácení zboží zdarma Ne
|
395,95 Kč
|
+36,21 Kč Delivery
Odhadované doručení:
2-8 čvc
|
432,16 Kč
|
Získávejte odměny při nákupu s okamžitým Cashback na vše.
Žádný háček, žádné náklady
- Připsáno na váš účet OnBuy
- Využijte je při dalším nákupu
- Ušetřete nebo si je vyberte
Staňte se Cashback VIP
Už po 1 nákupu získáte lepší nabídky a ceny