For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 127,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (Ilmainen) | to 2. - ti 7. heinä
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
- The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
- Since the for ECAS sits now on the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife on the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next time.
- for ERCF V2
- ERCF Filament Cutter Kit for ERCF V2
For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo Kuvaus
This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
Since the for ECAS sits now the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next .
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Consumables cutter kit
Tiedot
| OPC | PV87ZJ8 |
|---|---|
| Brändi | Typecat |
| Koodit | 4713230081034 (EAN) |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 12.5cm |
| Weight | 0.103kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Vertaile myyjiä tuotteelle For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
- Uusi alkaen 17,29 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(410 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
17,29 €
|
+Free Delivery
Arvioitu toimitus:
2-7 heinä
|
17,29 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset