For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 127,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (525,41 Ft) | hét 6. - pén 10. júl.
Eladó: Papishop
Visszaküldés: 30 nap
180 napos fizetési védelem
Legnépszerűbb termékek a(z) 3D nyomtató filamentum kategóriában
Összefoglaló
- This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
- The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
- Since the for ECAS sits now on the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife on the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next time.
- for ERCF V2
- ERCF Filament Cutter Kit for ERCF V2
For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo leírása
This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
Since the for ECAS sits now the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next .
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Consumables cutter kit
Részletek
| OPC | PV87ZJ8 |
|---|---|
| Márka | Typecat |
| Kódok | 4713230081034 (EAN) |
Termékadatok
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 12.5cm |
| Weight | 0.103kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Eladók összehasonlítása: For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
- Új innen 5 883,64 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(411 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
5 358,23 Ft
|
+525,41 Ft Delivery
Várható szállítás:
6-10 júl.
|
5 883,64 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el