For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 135,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | pia 9 - str 14 okt
Predáva: Papishop
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Zhrnutie
- This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
- The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
- Since the for ECAS sits now on the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife on the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next time.
- for ERCF V2
- ERCF Filament Cutter Kit for ERCF V2
For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo Popis
This is a simple filament cutter for the awesome for ERCF so tip tuning is less important.
The cutter get's mouted to the selector chart just behind the encoder - the cutter is basically an arm that swings to the left and right.
Since the for ECAS sits now the Arm the filament path can be opened by swining the arm to the side. Then the ERCF can feed some filament mid air (the filament tip) and when the arm swings back to close the filament path the tip gets cut off by the knife the arm. The cut off tip just falls off to the ground and the filament can be loaded with a clean tip the next .
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Consumables cutter kit
Podrobnosti
| OPC | PV87ZJ8 |
|---|---|
| Značka | Typecat |
| Kódy | 4713230081034 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 12.5cm |
| Weight | 0.103kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Porovnajte predajcov pre For ERCF V2 Enraged Rabbit Encoder Cutter ERCF Upgraded Filament Cutter Kit for ERCF V2 Voron 2.4 Trident Without Servo
- Nové od 20,24 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(436 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
20,24 €
|
+Free Delivery
Odhadované doručenie:
9-14 okt
|
20,24 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy