Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 136,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Prioriteetti (Ilmainen) | to 29. loka - ke 4. marras
Myyjä: LLhappy
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any DC currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
- As a bonus, we also give you the ambient temperature from the internal temperature sensor on the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
- To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run Arduino or CircuitPython code to read the temperature and capacitive measurement.
- Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
- Soil sensor
Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor Kuvaus
This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
As a bonus, we also give you the ambient temperature from the internal temperature sensor the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run or CircuitPython code to read the temperature and capacitive measurement.
Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
Color: Green
Material: PCB
Package Contents:
1 * Capacitive Soil Moisture Sensor Module
Tiedot
| OPC | PYJ6GD6 |
|---|---|
| Brändi | Zandonà |
| Koodit | 4711454442877 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 6cm |
| Weight | 0.012kg |
| Colour | Green |
| Material | PCB |
Vertaile myyjiä tuotteelle Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
- Uusi alkaen 30,14 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(200 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
30,14 €
|
+Free Priority Delivery
Arvioitu toimitus:
29 loka - 4 marras
|
30,14 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset