Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 136,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Prioritate (Gratuit) | joi 29 oct. - mar 3 nov.
Vândut de: LLhappy
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any DC currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
- As a bonus, we also give you the ambient temperature from the internal temperature sensor on the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
- To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run Arduino or CircuitPython code to read the temperature and capacitive measurement.
- Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
- Soil sensor
Descriere Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
As a bonus, we also give you the ambient temperature from the internal temperature sensor the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run or CircuitPython code to read the temperature and capacitive measurement.
Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
Color: Green
Material: PCB
Package Contents:
1 * Capacitive Soil Moisture Sensor Module
Detalii
| OPC | PYJ6GD6 |
|---|---|
| Brand | Zandonà |
| Coduri | 4711454442877 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 6cm |
| Weight | 0.012kg |
| Colour | Green |
| Material | PCB |
Compară vânzătorii pentru Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
- Nou de la 183,87 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(200 recenzii) | - |
30 zile
Retur gratuit Nu
|
183,87 RON
|
+Free Priority Delivery
Livrare estimată:
29 oct. - 3 nov.
|
183,87 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase