Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 136,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Prioritert (Gratis) | ons 28. okt - man 2. nov
Solgt av: LLhappy
Returer: 30 dager
180 dagers betalingsbeskyttelse
Sammendrag
- This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any DC currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
- As a bonus, we also give you the ambient temperature from the internal temperature sensor on the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
- To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run Arduino or CircuitPython code to read the temperature and capacitive measurement.
- Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
- Soil sensor
Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor Beskrivelse
This design is with a capacitive measurement. Capacitive measurements use only one probe, don't have any exposed metal, and don't introduce any currents into your plants. We use the built in capacitive touch measurement system built into the ATSAMD10 chip, which will give you a reading ranging from about 200 (very dry) to 2000 (very wet).
As a bonus, we also give you the ambient temperature from the internal temperature sensor the microcontroller, it's not high precision, maybe good to + or - 2 degrees Celsius.
To make it so you can use the sensor with just about any microcontroller, we have an I2C interface. Connect a 4-pin JST-PH cable (not included) to your microcontroller or single board computer to 3-5V power, Ground, I2C SDA and I2C SCL and then run or CircuitPython code to read the temperature and capacitive measurement.
Please note: This is just the sensor, you'll also need a JST 4-PH cable (not included) to go along for plugging it in! You can use Seeed Grove cables (not included) and boards (not included) to connect - the Grove cable (not included) is a little different looking but will fit just fine.
Color: Green
Material: PCB
Package Contents:
1 * Capacitive Soil Moisture Sensor Module
Detaljer
| OPC | PYJ6GD6 |
|---|---|
| Merke | Zandonà |
| Koder | 4711454442877 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 6cm |
| Weight | 0.012kg |
| Colour | Green |
| Material | PCB |
Sammenlign selgere for Soil Sensor Capacitive Soil Moisture Sensor Module I2C Interface Capacitive Moisture Sensor
- Ny fra 241,39 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(200 anmeldelser) | - |
30 dager
Gratis retur Nei
|
241,39 kr
|
+Free Priority Delivery
Estimert levering:
28 okt - 2 nov
|
241,39 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser