For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
Skladem
Proč si zamilujete nakupování na OnBuy:
- Získejte Cashback při každém nákupu – využijte jej okamžitě při další objednávce
- Doprava zdarma – u milionů položek na celém webu
- Zákazníci nás mají rádi – 131,000 recenzí s hodnocením “Vynikající”
Ceny zboží prodávaného na OnBuy jsou zobrazeny včetně DPH.
Možnosti platby bez úroků k dispozici
Zobrazit kompletní popis a podrobnosti o produktu
Doručení: Priorita (112,00 Kč) | čtv 20 - úte 25 srp
Prodává: LLhappy
Vrácení zboží: 30 dní
180denní ochrana platby
Shrnutí
- For HW Battery Unlock Tool
- Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
- Method 2: While the device battery is charged, power on the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
- Output supports both USB-A and Type-C ports. The microcontroller is powered by a 3V button battery.
- For HW USB Test Board
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB Popis
For HW Battery Unlock Tool
Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
Method 2: While the device battery is charged, power the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
Output supports both USB-A and Type-C . The microcontroller is powered by a 3V button battery.
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Test Board
Podrobnosti
| OPC | PV89DT6 |
|---|---|
| Značka | Zandonà |
| Kódy | 4713344538844 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Porovnejte prodejce pro For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
- Nové od 2 185,47 Kč
| Prodejce | Hodnocení | Záruka | Vrácení zboží | Cena | Doručení | Celkem | Množství |
|---|---|---|---|---|---|---|---|
|
Odesláno z:
|
(175 recenzí) | - |
30 dní
Vrácení zboží zdarma Ne
|
2 073,47 Kč
|
+112,00 Kč Delivery
Odhadované doručení:
20-25 srp
|
2 185,47 Kč
|
Získávejte odměny při nákupu s okamžitým Cashback na vše.
Žádný háček, žádné náklady
- Připsáno na váš účet OnBuy
- Využijte je při dalším nákupu
- Ušetřete nebo si je vyberte
Staňte se Cashback VIP
Už po 1 nákupu získáte lepší nabídky a ceny