For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 131,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (112,00 kr) | tir 25. - man 31. aug
Solgt av: LLhappy
Returer: 30 dager
180 dagers betalingsbeskyttelse
Du vil kanskje også like
Sammendrag
- For HW Battery Unlock Tool
- Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
- Method 2: While the device battery is charged, power on the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
- Output supports both USB-A and Type-C ports. The microcontroller is powered by a 3V button battery.
- For HW USB Test Board
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB Beskrivelse
For HW Battery Unlock Tool
Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
Method 2: While the device battery is charged, power the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
Output supports both USB-A and Type-C . The microcontroller is powered by a 3V button battery.
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Test Board
Detaljer
| OPC | PV89DT6 |
|---|---|
| Merke | Zandonà |
| Koder | 4713344538844 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Sammenlign selgere for For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
- Ny fra 858,53 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(175 anmeldelser) | - |
30 dager
Gratis retur Nei
|
746,53 kr
|
+112,00 kr Delivery
Estimert levering:
25-31 aug
|
858,53 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser