For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 131,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Priorita (10,00 €) | str 19 - pon 24 aug
Predáva: LLhappy
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Zhrnutie
- For HW Battery Unlock Tool
- Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
- Method 2: While the device battery is charged, power on the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
- Output supports both USB-A and Type-C ports. The microcontroller is powered by a 3V button battery.
- For HW USB Test Board
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB Popis
For HW Battery Unlock Tool
Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
Method 2: While the device battery is charged, power the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
Output supports both USB-A and Type-C . The microcontroller is powered by a 3V button battery.
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Test Board
Podrobnosti
| OPC | PV89DT6 |
|---|---|
| Značka | Zandonà |
| Kódy | 4713344538844 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Porovnajte predajcov pre For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
- Nové od 87,72 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(175 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
77,72 €
|
+10,00 € Delivery
Odhadované doručenie:
19-24 aug
|
87,72 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy