For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 131,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Prioriteetti (10,00 €) | ke 19. - ma 24. elo
Myyjä: LLhappy
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- For HW Battery Unlock Tool
- Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
- Method 2: While the device battery is charged, power on the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
- Output supports both USB-A and Type-C ports. The microcontroller is powered by a 3V button battery.
- For HW USB Test Board
For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB Kuvaus
For HW Battery Unlock Tool
Method 1: Plug the device into an ammeter or power cable box with a USB port. Plug a three-wire power cable into the device output. Attach the battery clip of the power cable directly to the motherboard being repaired.
Method 2: While the device battery is charged, power the motherboard being repaired. Attach the two-wire power cable to the motherboard normally (the device does not need to be plugged in). Connect the device GND pin to the motherboard GND, and connect the I0 output pin to the motherboard battery connector IO pin.
Output supports both USB-A and Type-C . The microcontroller is powered by a 3V button battery.
Color: As Shown
Material: Plastic+Metal
Package Contents:
1 x Test Board
Tiedot
| OPC | PV89DT6 |
|---|---|
| Brändi | Zandonà |
| Koodit | 4713344538844 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Vertaile myyjiä tuotteelle For HW Battery Decryption Board to Boot Into the System for HW Battery ID Test Board USB
- Uusi alkaen 77,08 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(175 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
67,08 €
|
+10,00 € Delivery
Arvioitu toimitus:
19-24 elo
|
77,08 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset