1/2in Water Flow Sensor 1.75MPa Hall Sensor Turbine Pulse Flowmeter

1/2in Water Flow Sensor 1.75MPa Hall Sensor Turbine Pulse Flowmeter Description

Interface size: 1/2inch(DN15)
Working voltage range: DC 5-24V
Medium temperature: -20C-+100C
Water pressure resistance: 1.75MPa
Output pulse high level: DC 4.5V (input voltage DC 5V).

Output pulse low level: 100MΩ
Flow range: 1-25 L/min 3%
Tightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation.
Flow pulse characteristics: 1/2inch External thread F=(8.1 x Q)3% 1/2inch Female male thread F=(10 x Q)3% Q = L/Min.
Wiring mode:
Red IN is connected to the positive pole
Yellow UOT signal output line
Black GND connects to the negative pole
Colour:Gold
Material:Brass

Package Contents:
1 x Water Flow Sensor

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.