1Pair Front Car Headlight Lens Light Cover For A4 B8 2008-2012

1Pair Front Car Headlight Lens Light Cover For A4 B8 2008-2012 Description

installation : 1. If you have a furnace that better, Simply remove the back cover of the luminaire and the bulb. Put in the oven and warm 80 paragraph C. Heat paragraph softens 10 minutes and a glue. The lamp is separate from the lamp.
2: If you do not have an oven, you have to use a heat , which heats the sharpest corner of the headlight, warms to it for a while, and After the glue has softened Inserts a screwdriver. (Note: do not use too many forums to avoid damage; when warming up a glove And touch, even a little heat, to stop the heating. Make sure that the temperature is not too high to avoid damage to the Faris)
4: after the long heat, quickly open the corner and do not forget to wear gloves (gloves should be clean and can not be discarded). 5: well and was more efficient, heating up a paragraph, a minute was enough. If it does not go well. Continue one. Heat a separate part with a heat . A glue softens. Quickly separated. 6: after separation, do your best. Clean the glue inside the glue tank. Put on gloves and start installing a new lamp. 7: Use glue to apply a glue to the container.
8: Install a new lamp cover. A small amount of glue overflows during an installation. It can not be processed in the first place. After the glue
Dried. Deal with a blade.
For A4 B8 2008-2012 Car Headlight Clear Lens Shell Cover Driver & Passenger Side Auto Shell
Headlight lens cover made of high quality Polycarbonate (PC) plastic material, environment-friendly with a protective UV coating which prevents yellowing or fading. Having Elegant appearance, looks very cool and Top quality guaranteed.
Introduction:
Product Name: Car Headlight lamp
Production process: high temperature injection molding PC hardening
Product Material: PC material
Applicable models: for A4 b8 2008-2012
1.For A4 b8 2008-2012
2.Made of high quality plastic material, environment-friendly,light weight and durable.
3.Transparent shell, does not affect the light emission.
4.Made of high quality Polycarbonate (PC) plastic with a protective UV coating which prevents yellowing or fading.
5.Protect your headlight of your car from breaking, dustproof and waterproof.
6.Elegant appearance, looks very cool.
7.Easy to remove and install.
8.Top quality guaranteed.
Specifications:
, Best Quality.
Material: Polycarbonate (PC) plastic
Item Name:Headlight Cover
Placement On Vehicle:Front, Left & Right
Color: Clear
Package Included:
2 x Headlight Lenses Cover (left & right)
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.