27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack

27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack Description

2Set pickup: 1 set x Guitar Pickup Piezo Transducer & 1 x Acoustic Pickup
Very easy to install and sounded good through several different amps.
Plug Dia.: 6.35mm/0.25 inch; Cable Length(.): 35cm/ 13.78 inch.
Suitable for Guitar Violin Ukulele Mandolin Banjo Guitar.
With the advantage of being to interfering external sounds and not be influenced by sound reflections from nearby objects.

Material: Metal& plastic
Color: As Shown
Acoustic Pickup:
Specially designed for acoustic instruments
Jack: 6.35 single audio
Cord Length: About 16 inch / 41 cm
With an adhesive in the back of the transducer
100% new and high quality!
Guitar Pickup Piezo Transducer:
The sound pickup is high-quality 27mm Piezoelectric ceramic disc transducer
It is very large and can collect a range of sound in case you are not sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which easy . All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Fit for most string music instruments such as Guitar Mandolin Guitar Violin Ukulele Banjo, etc.
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best response
3 Drill a hole from inside the body, loosen -pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.
Cable long: 32cm
Plug Dia: 6.35mm/0.25 inch

Package Contents:
1 x Guitar Pickup Piezo Transducer
4 x gasket
1 x knob
1 x Acoustic Pickup

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.