27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack

27MM Guitar Pickup Piezo Transducer Amplifier With 6.35MM Jack Description

Very easy to install and sounded good through several different amps.
Plug Dia. : 6.35mm/0.25 inch; Cable Length(.) : 35cm/ 13.78 inch.
Suitable for Guitar Violin Ukulele Mandolin Banjo Guitar.
With the advantage of being to interfering external sounds and not be influenced by sound reflections from nearby objects.
Material:Metal
COLOR:black
The sound pickup is high-quality 27mm Piezoelectric ceramic disc transducer
It is very large and can collect a range of sound in case you are not sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which easy . All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Fit for most string music instruments such as Guitar Mandolin Guitar Violin Ukulele Banjo, etc.
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best response
3 Drill a hole from inside the body, loosen -pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.
Cable long : 32cm
Plug Dia: 6.35mm/0.25 inch

Package included:
1x pickup
4x gasket
1x knob
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.