40 Pcs Copper Brazing Rods for HVAC Refrigeration

40 Pcs Copper Brazing Rods for HVAC Refrigeration Description

Our packaging contains 40 pieces of Phos copper brazed alloy rods, each rod is 2mm in diameter 5/64 inches and 25cm in length / 9.85 inches.Total 1/2 pound or half pound or 250 grams of package.Use our products to meet all your needs
Our Phos copper brazing rods comply with A5.8.Chemical composition of brazing rod: phosphorus (P): 6.6~7.4%, copper (copper): residual.Low measurement point 710-820.Solid temperature: 1310F / 710C, liquid temperature: 1508F / 820C.Good fluidity during welding, molten metal can flow into small gaps
Phos copper brazing alloy has air self-permeability, moderate melting point and high fluidity, and performs perfectly under gas flame, induction, furnace brazing and other methods; has higher joint strength and stronger conductivity; is very suitable for the setting of MAPP, MAP, propane and oxyacetylene gas welding flashlights.Also suitable for contact TIG welding for professionals and DIY enthusiasts
BCuP-2 is suitable for resistive brazing, flame brazing and high frequency brazing.Copper-phosphorus brazing alloy is suitable for brazing of copper and copper alloys, and is widely used in refrigerators, household appliances, motors, instruments and other manufacturing industries.
The phosphorus in the brazing alloy is used as a soldering agent, so when using copper-phosphorus copper brazing alloy, there is no need to use a solder.

Color: As Shown
Material: Copper

Package Contents:
40 pcs * hvac solder

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.