433.92MHz Rolling Code Gate Opener Remote Control for Garage Door Keychain Transmitter-Compatible with QZ1 QZ2 QZ3 S449 Systems

433.92MHz Rolling Code Gate Opener Remote Control for Garage Door Keychain Transmitter-Compatible with QZ1 QZ2 QZ3 S449 Systems Description

1. Type of programming: Programming with the receiver

2. Number of channels: 2

3. Code type: Rolling code

4. Frequency: 433.92 MHz

5. Operating range: 10-50 m (open space)

Remote includes battery.

Security: Dynamic code provides high security and is non-copyable.

Disclaimer: Your original remote must match the one shown in the listing. This remote is not compatible with other remotes.

Programming instructions:

The remote performs the same functions as your original remote. Program it with your receiver following the instructions in the included manual.

1. Locate the Learn / Code Set button on the motor-typically under the lamp cover or on the back of the motor.

2. Press and release the Learn / Code Set button once. An indicator light will illuminate.

3. Press the desired button on the remote once. The indicator light will turn off.

4. Press the same button again-the indicator light will flash and then turn off, confirming successful programming.

5. Test the remote operation.

Color: As shown

Material: Plastic

Package contents: 2 Remote control

Note: Lighting conditions and display settings may cause slight color variation between the image and the actual product. Measurement tolerance: 1-3 cm.