7.1 Channel USB External Sound Card Audio Adapter

7.1 Channel USB External Sound Card Audio Adapter Description

1 pcs Audio Adapter & 1 pcs Amplifier Board Module
Plug the Sound Adapter into your USB port, and then plug your headphones into the Adapter.7.1 Channel sound without the investment in a whole set of speakers!Plug this Adapter into a USB port on the front, and use the headphone jack (for output) or the miniphone jack (for input).
The USB Virtual 7.1 Channel Sound Adapter is a highly flexible audio interface which can be used either with desktop or notebook systems.Comes bundled with Xear 3D Sound simulation software, and turns your stereo speaker or earphones into a 7.1 channel environment!
USB2.0 Full-Speed (12Mbps) Specification USB HID Class Specification 1.1 USB Audio Device Class Specification 1.0 USB bus-powered, no external power required.Technical Specification 100% New 7.1 Channel External USB Audio Sound Card Adapter USB2.0 Full-Speed Specification
Connectors: USB Type A, Stereo output jack, mono miniphone input jack USB bus-powered, no external power required.LED indicators: miniphone-Mute Status, Activity No drivers required for 98SE / ME / 2000 / XP / 7 / Server 2003 / Vista, Linux, MacOS

Audio Adapter:
Dimensions: 2.25 x 1.0 x 0.50 inch
Module:
Product Name :Bluetooth Digital Amplifier Module
Working voltage : DC: 8~24V
Bluetooth version :5
Transmission distance: 15 meters (visual unobstructed)
Number of channels: two channels (stereo)
Output power (@1KHz): 16W*2 @12V 4 ohm
10W*2 @12V 8 ohm
15W*2 @16V 8 ohm
20W*2 @20V 8 ohm
30W*2 @24V 8 ohm (requires heat sink)
Adapter speaker (30W~150W) 4 ohms (8~12V power supply)
8 ohms (8~24V power supply)
16 ohms (8~24V power supply)
Module protection mechanism: reverse power protection
Short circuit protection
Self-recovery overheat protection
After the power is turned on, the blue indicator light flashes quickly and enters the Bluetooth mode; after the "Beep" is broadcast, the pairing mode is entered to wait for pairing; the mobile phone Bluetooth searches for "XY-P15W", and clicks "XY-P15W" Connect, play the "Beep" after the connection is successful, the indicator light is long, you can play the music of the mobile phone, the indicator light flashes slowly when playing music; after the Bluetooth is disconnected, the power amplifier board prepares for pairing, and plays the "Beep" to enter Pairing mode waits for pairing.
colour:black
Material:Plastic + metal

Package Contents:
1 * External Sound Card Audio Adapter
1 * Module

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.