Bluetooth Stereo Audio Receiver Module

Bluetooth Stereo Audio Receiver Module Description

1. Use KTC2700H Bluetooth module (BES2700H Bluetooth chip). 2. The pinholes are standard 2.54MM spacing, which is convenient for welding and debugging! 3. The board has integrated and LED1 indicators! 4. Integrated power-on delay circuit, can be used after power on!
5. supply voltage is 3.3V-5V, the voltage cannot exceed 6V! 6. When SPDIF is output, DATA is SPDIF OUT output pin! 7. Board size: 24 x 36.5MM
Button: PI00: short to pause, long for 3 seconds to enter pairing, Long for 5 seconds to clear pairing record [PLAY]

PIO1: short to reduce volume [VOL-]
PIO2: short to increase volume [VOL+]
PI03: short to play the previous song [PREV]
PI04: short to play song [INEXT]
PI05: Bluetooth connection high level (output high level 3.3V)
Bluetooth name: KTC2700H
1. Power-on method: power on
Power on automatically enters back connection, and automatically enters pairing mode if back connection fails
2. Button
PI00: short to pause, long for 3 seconds to pair, long for 5 seconds to clear pairing record
Pin definition:
1: DATA: IIS data output
2: BCK: IIS serial clock
3: LRCILK: IIS clock
4: -IN: Power input 5V
5: GND: Power ground
6: SPK-R+: Differential analog signal output
7: SPKR-: Differential analog signal output
8: SPK-L+: Differential analog signal output
9: SPK-L-: Differential analog signal output
10: SPK-EN: Amplifier enable, pull high when there is audio
11: NEXT: Next song button
12: PREV: Previous song button
13: VOL+: Volume plus button
14: VOL-: Volume plus button
15: PLAY: Play/pause button
16: 33-0UT: 3.3V output, used for button common pin
17: LED1: Blue light
18: : Red light
Color: Black
Material: PCB

Package Contents:
1 * Audio Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.